Blue Life Water Colors Aquarium Background 48x30 Royal Blue

BenefitsWater Colors will eliminate all common problems associated with traditional aquarium backgrounds. There are no messy toxic paints to deal with! Easy one time application! Water Colors eliminates the need for taping and re taping. Water Colors will add visual depth, and improve your lighting efficiency, and is unaffected by salt creep. Water Colors is safe for Freshwater and Saltwater. Not recommended for acrylic aquariums.DirectionsPrepare a Soap Water Solution Prepare a solution by adding 4 drops of dish soap to the provided 4oz. spray bottle. Normal liquid dish soap containing no lotions, oils, waxes or enzymes works fine.Prepare Work Area and MaterialsMeasure the area you wish to apply background to and cut the background to that measurement. Make sure the work surface, aquarium, and surrounding area are properly cleaned to avoid contaminating the background. Even if the aquarium appears clean, it should be cleaned with the spray soap water solution make sure aquarium surface is clean of all impurities. DO NOT ALLOW BACKGROUND BACKING TO GET WET.Applying Water Color BackgroundUse the spray soap water solution to wet the aquarium surface you are applying background to. Make sure your work surface and surrounding areas are clean and free of contaminates. On a flat surface like a table or countertop place the background color side down, pull the backing off keeping the backing parallel to the work surface. Wet the entire adhesive side using the spray soap water solution. Carefully place the background adhesive side to the aquarium surface you are applying to. Lightly squeegee horizontally, working from the center outwards to the left and then to the right. Applying more pressure, continue working the remainder of air and solution out from between the aquarium and the background. Allow 90 minutes for adhesive to set before moving or touching applied background.... Read More